|
Power Traveller Start Monkey 200
PowerTraveller Startmonkey 200 Features at a Glance - Introducing the startmonkey200 - the world`s smallest "jump start" system for car batteries. In 2009, the RAC were called out a whopping 177,916 times to jumpstart cars! A flat battery was the number 1 reason they were called out for breakdown assistance during last year. The startmonkey200 is suitable for use on batteries with up to a 650CCA (...
More info
PowerTraveller Startmonkey 200 Features at a Glance - Introducing the startmonkey200 - the world`s smallest "jump start" system for car batteries. In 2009, the RAC were called out a whopping 177,916 times to jumpstart cars! A flat battery was the number 1 reason they were called out for breakdown assistance during last year. The startmonkey200 is suitable for use on batteries with up to a 650CCA (Cold Cranking Amps - you can check your cold cranking amp rating by checking the sticker on the top of your car`s battery) and can restart this type of standard 12 volt car battery between 15 and 20 times on a full charge thanks to its High Energy Dynamic Polymer Battery. If your battery exceeds 650 CCA, you will require the startmonkey400 - coming 2011. It`s packed with high-tech features to give you total peace of mind. The startmonkey200 has 2 output channels: 1) a 12volt, 200Amp car jump start and 2) a 12volt, 100 watt max, 8Amp DC output for charging your portable gadgets. Startmonkey200 is easy to use. For the average car with a flat battery, firstly ensure the engine battery is 12 volts (if 5 or 24 volts - DO NOT USE with startmonkey200) and has a CCA rating of less than 650. Check the battery capacity level in the startmonkey200 and then simply attach the jump leads (red to red, black to black) to your car battery and the startmonkey200 will automatically start delivering 200 amps of continuous power. Leave the startmonkey200 for 5-8 seconds, then turn the ignition on your car and your car will start.If the car fails to start, leave the startmonkey200 connected for between 10 and 15 minutes and then turn the ignition again. Once your car starts, the startmonkey200 will automatically switch off. Disconnect the startmonkey200 and store in case provided. On the front of the startmonkey200 is a 4-segment LED array. When the startmonkey200 is activated, the LED array will light up GREEN to visually confirm that the startmonkey200 is charging the flat battery. Wh
Minimize
|
|
|
